| Customization: | Available |
|---|---|
| Type: | Slot Type Photoelectric Sensor |
| Output Signal Type: | Digital Type |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Sensor Type | Through Beam Reflection | Polarized Reflection | Diffuse Reflection | ||||
| Type | NPN | Molding cable | CPA-TR20MN3 | CPA-RMR4MN3 | CPA-DR100N3 | CPA-DR300N3 | CPA-DR1MN3 |
| NPN | Connector | CPA-TR20MN3-A | CPA-RMR4MN3-A | CPA-DR100N3-A | CPA-DR300N3-A | CPA-DR1MN3-A | |
| PNP | Molding cable | CPA-TR20MP3 | CPA-RMR4MP3 | CPA-DR100P3 | CPA-DR300P3 | CPA-DR1MP3 | |
| PNP | Connector | CPA-TR20MP3-A | CPA-RMR4MP3-A | CPA-DR100P3-A | CPA-DR300P3-A | CPA-DR1MP3-A | |
| Detection distance | 20m | 0.1 ~4m | 100mm | 300mm | 1m | ||
| Spot Diameter (Reference Value) | - | 40x45mm | 40x50mm | 120x150mm | |||
| Standard Object Detection | Opaque objects above ψ 7mm | Opaque objects above ψ 75mm | White drawing paper: 300x300mm | ||||
| Angle of Direction | Minimum2° | - | |||||
| Light Source (Wavelength) | Red light-emitting diode (617nm) | ||||||
| Supply Voltage | DC12~24V ripple (p-p) less than 10% (DC10~30V) | ||||||
| Consumed Current | Below 40mA (emitter 25mA Below, under receiver 15mA) | Below 25mA | |||||
| Control Output | NPN/PNP (collector open-circuit output) load current below 100mA (residual voltage below 3V), load supply voltage below 30V | ||||||
| Action Mode | Dark ON / Light ON select by wire connection | ||||||
| Indicator | Action indicator (orange) | ||||||
| Stable indicator (green) | |||||||
| Protection Circuit | Power indicator (green): through beam emitter only | ||||||
| Response Time | Power supply reverse connection protection, surge absorption, load short circuit protection | ||||||
| Sensitivity Adjustment | 0.5ms | ||||||
| Ambient Illumination (Receiver Side) | Single knob | ||||||
| Ambient Temperature Range | Lighting collecting surface illumination incandescent lamp: below 3000lx,sunlight: below 10000lx | ||||||
| Ambient Humidity Range | Working: -25 ~55ºC / Storage: each -40~70ºC (no icing, no dew) | ||||||
| Insulation Resistance | Working: 35~85%RH/ Storage: each 35~95%RH (no dew) | ||||||
| Withstand Voltage | 20MΩ or more ( DC500VMeg-ohmmeter) | ||||||
| Vibration | AC 1,000V 50/60Hz lmin between the whole charging part and the shell | ||||||
| Impact | 10~55Hz up and down amplitude is 1.5mm, 2 hours in X,Y,Z directions | ||||||
| IP Grade | 300m/s² 3 times in X,Y,Z directions IEC standard IP67 | ||||||
| Weight (Packing Status/Sensors Only) | Pre-wire (2m) | Cable Weight: about 94g | Cable weight: about 50g | ||||
| Connector | M12 connector weight about 80g | M12 connector weight: about 55g | |||||
| Material | Case | ABS | |||||
| Lens / Display Window | PDM | ||||||
| Knob | POM | ||||||
| Blind Nut | ABS | ||||||
| Attachment | Instructions for use, M18 nuts (4) | Reflective plate, manual of use, M18 nut (2) | Instructions for use, M18 nuts (2) | ||||
){kind=link}