Customization:	Available
Description:	Fiber Optic Sensor
Model Number:	Fs-N41p

Model		FS-N41C*1
Type		M8 Connector*2
Main unit/expansion unit		Main unit
Response time		23 µs (S-HSPD3)/50 µs (HSPD4) / 250 µs (FINE) / 500 µs (TURBO) / 1 ms (SUPER) / 4 ms (ULTRA) / 16 ms (MEGA) / 64 ms (TERA)
Number of control outputs		2*5
Number of external inputs		1*5
Light source LED		Transmitter side: Red, four-element LED (wavelength 660 nm)
Control output		Open-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) / 20 mA or less (when used as an expansion unit) Residual voltage NPN 1.4 V or less (output current 10 mA or less) / 2 V or less (output current 10 to 100 mA) PNP 1.6 V or less (output current 10 mA or less) / 2.2 V or less (output current 10 to 100 mA)
External input		Input time 2 ms (ON) / 20 ms (OFF) or longer*6
Protection circuit		Protection against reverse power connection, output overcurrent, output surge, and reverse output connection
Mutual interference prevention		S-HSPD/HSPD 0 units, FINE 4 units, TURBO/SUPER/ULTRA/MEGA/TERA 8 units (The mutual interference prevention values are twice those shown here when Double is set.)
Power supply	Power voltage	10 to 30 VDC (including 10% ripple (P-P) or less) , class 2 or LPS*7
	Current consumption	During normal operation: 910 mW or less (36 mA or less at 24 V/65 mA or less at 12 V) ECO ON: 840 mW or less (33 mA or less at 24 V/60 mA or less at 12 V) ECO FULL: 750 mW or less (30 mA or less at 24 V/52 mA or less at 12 V)*8
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux or less, sunlight: 30,000 lux or less
	Ambient temperature	-20 °C to +55 °C (no freezing)*9
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm; 2 hours each for X, Y, and Z axes
	Shock resistance	500 m/s2 ; 3 times each for X, Y, and Z axes
Case material		Main unit and cover: polycarbonate
Weight		Approx. 25 g
1 IO-Link Specification V.1.1/COM2 (38.4 kbps) is supported. 2 Ensure the cable length is 30 m or less for the M8 connector type. Ensure the cable length is 20 meters or less when connecting by way of IO-Link. 3 Restrictions when S-HSPD is selected Output 2 of dual output types is fixed to OFF. IO-Link communication cannot be used. Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode. Output timer, Limit Detection, and Display Gain cannot be used. FULL cannot be selected for the ECO function. 4 Restrictions when HSPD is selected Display Gain cannot be used. 5 Output 2 and the external input are selectable. 6 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected. 7 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher. 8 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max. *9 When expanded by 1 to 2 units: -20 °C to +55 °C. When expanded by 3 to 10 units: -20 °C to +50 °C. When expanded by 11 to 16 units: -20 °C to +45 °C. When using 2 outputs, 1 unit is counted as 2 units. The prescribed values for the ambient temperature assume that the sensor amplifier has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Original Keyence Fs-N41p Fs-N42p Digital Pressure Sensor Optic Digital Fibre Sensors Fs-N41n Fs-N41c

Find Similar Products

Product Description

Company Info.

Basic Info.

Product Description

Send your message to this supplier

People who viewed this also viewed

Product Groups

Find Similar Products By Category

Related Categories

Hot Searches