3986 Series High-Sensitivity Reception and High-Precision Measurement Performance Noise Figure Analyzer

• After-sales Service: User Guides
• Warranty: User Guides
• Accuracy of Frequency Reference: ±<0.2ppm (23°c±3°c)
• Gain Measurement Range: -20 dB~+40 dB
• Gain Measurement Uncertainty: ±<0.17 dB
• Transport Package: Carton or Wooden
• Model NO.: 3986 series
• Specification: Customized
• Trademark: HF FUTURE
• Origin: China

Product Description

Product Description

3986 Series Noise Figure Analyzers include 3986A (10 MHz~4 GHz), 3986D (10 MHz~18 GHz), 3986E (10 MHz~26.5 GHz), 3986F (10 MHz~40 GHz) and 3986H (10 MHz~50 GHz). Features of the product include wide-range frequency coverage, high-sensitivity reception, friendly user interface, big screen dual channel HD display, various external interfaces, and dual noise source drive etc. It can measure the noise figure and gain of amplifiers, up converters and down converters, as well as to support automatic measurement of noise figure of multi-stage converters. Guide interfaces are intuitive for setting measurement modes. The comprehensive loss compensation function can compensate loss induced in measurement channel before and/or after the device under test by means of fixed or table forms. The built-in noise figure measurement uncertainty calculator does quantitative analysis of the uncertainty of measurement noise figure. Limit line function that provides test passed/failed notification simplifies the determination of passed/failed test. User friendly features make it easy for engineering technicians to set measurements correctly, to observe and save measurement results in different forms. They can be widely used in R&D, manufacturing, testing and technical assurance tests of electronic equipment for communication etc.

 

FEATURES

Wide frequency coverage

 

High-sensitivity reception and high-precision measurement performance

 

English operation interface, big screen dual channel HD display

 

Amplifier, Up converter and down converter measurement mode

 

Single sideband and double sideband measurement function

 

Detailed Photos

Product Parameters

s

Major Technical Specifications
Frequency   Range	10 MHz~4 GHz/18 GHz/26.5 GHz/40 GHz/50   GHz
Accuracy   of Frequency Reference	±<0.2ppm   (23°C±3°C)
Accuracy   of Frequency Tuning	±< (Reference frequency error   +100 kHz) 10 MHz~4 GHz
	±< (Reference frequency error   +400 kHz) 4 GHz~18/26.5/40/50 GHz
Noise   Figure Measurement Range	0~30   dB (ENR: 12 dB~17   dB)
Noise   Figure Measurement Uncertainty	±<0.1 dB
Gain   Measurement Range	-20 dB~+40   dB
Gain   Measurement Uncertainty	±<0.17 dB
Input   VSWR	<1.90: 1         10 MHz≤f≤4 GHz
	<2.10: 1         4 GHz<f≤18 GHz
	<2.40: 1         18 GHz<f≤26.5 GHz
	<2.40: 1         26.5 GHz<f≤40 GHz
	<2.40: 1         40 GHz<f≤50 GHz
Instrument's own  Noise Figure	<8.0 dB         10 MHz≤f≤4 GHz
	<7.5 dB         4 GHz<f≤18 GHz
	<8.0 dB         18 GHz<f≤26.5 GHz
	<10.0 dB        26.5 GHz<f≤40 GHz
	<12.0 dB        40 GHz<f≤50 GHz
Jitter   (uneven)	<0.17 dB        (Y Factor   Typical Value 5 dB)
Noise   source drive voltage	<1.0 V          Noise   source off
	+28.0±0.10 V     Noise   source on

 

General Technical Specifications
Temperature   Range		Operation:   0~+40°C Storage:   -40~+70°C
Altitude   Range		4, 600   meters
Electromagnetic   compatibility		Comply   with the following requirements of GJB 3947A-2009 provision 3.9.2: a) Conducted   emission through CE102 power cable; b)    Conducted susceptibility of CS101 power   cable; c)    Conducted susceptibility injected by CS114   harness; d) Radiated   emission through RE102 electric field; e) Radiated   susceptibility through RS103 electric field.
Safety		Comply   with safety certificate requirements of GJB 3947A-2009 provision 3.10. a)   The   resistance between power input end and the chassis (power switch on engaged   position) shall be no less than100 MΩ   under standard atmosphere pressure and no less than 2 MΩ in damp environment. b) Apply   1500 VAC   between the power   input end and the chassis. And   no symptom like breakdown, flash-over and flicker shall happen. c) In   operation, leakage current between chassis and ground shall be no more than   3.5 mA.
Power   requirements	Voltage   and frequency (nominal value)	220 V, 50 Hz; (99~121) Vrms, (50~60/440) Hz (198~242) Vrms, (50~60) Hz
	Power   consumption	Max. power   consumption: 250 W Max.   standby: 20 W
Monitor		1280×800, XGA 10.1"
Data   storage		160 G solid state disk Support USB   2.0 standard storage units
Weight		Net weight:   less than23 kg; Packaged   shipping weight: 34 kg   nominal value
Size		Width×Height×Depth   (mm)=426×177×460 (handle, bottom, pad and side strap excluded), allowed   tolerance ±10 mm. Width×Height×Depth   (mm)=510×190×534 (handle, bottom, pad and side strap included), allowed   tolerance ±10 mm.
Warranty		3986 Series   Noise Figure Analyzers are   under a standard warranty of 18 months.
Reliability		MTBF (θ0)   ≥5000 h
Calibration   interval		A   calibration interval of one year is recommended. Calibration service shall be   provided by professional calibration institutions.

Packaging & Shipping

 

Company Profile